Dendo Blind Automation Motor System Compatibility

Posted on 25 May, 2022 by Micheal Alexander

Compatible with most Aussie blinds​

Roller blinds might all look alike, but in fact there is a multitude of different hardware configurations from various manufacturers. Therefore, care must be taken to ensure that the motor can be used with a particular blind. The two main determining factors for compatibility are:

The drive side bracket (the one that the chain winder is attached to)

The blind tube

Due to the sheer number of different designs, it is impossible to guarantee compatibility with every blind out there. However, we have come up with a range of adapters to ensure our motors are compatible with the large majority of blinds found in Australia. Smart Home Products

IMPORTANT

It is crucial that you use the information presented in this document to order the correct adapters for your blinds. To do this you will need to first remove the blind from its brackets. If you are unsure about how to remove your blinds, please see Removing the Roller Blind for additional guidance. Home Assistant

NO NEED TO CHECK EVERY BLIND

If you plan on motorising multiple blinds, it is generally not necessary to take apart each and every blind just to check for compatibility. Blinds purchased from the same company will usually share a common hardware system. One caveat is if there is a large size discrepancy between blinds. In such cases, it is recommend to check both the smallest and the largest blind since it is common for larger blinds to use heavier duty components.